P&E Plumbing and Building Maintenance Inc. BACK返回主页



ANNUAL MAINTENANCE FOR VIESSMANN 德国菲斯曼锅炉年度保养须知

         


Why does my boiler show error code F4 and lock out automatically?

Generally, the lifespan of a boiler is 10-15 years. If the boiler is maintained annually as required by the manufacturer, the BC Safety Authority, and our installation contractor, it can usually exceed 15 years. However, without annual maintenance, most boilers need to be replaced within 10 years.

F4 represents an equipment fault and can have many causes. The worst-case scenario is that the internal components have corroded and are leaking, causing a small jet of water that prevents the boiler from starting. This situation requires replacing the internal heat exchanger, which typically costs around $5000. Many customers choose to replace the entire boiler instead, which costs approximately $12,500.

There are other reasons for the F4 error code as well. A dirty combustion chamber can reduce the ignition arc, preventing the boiler from igniting. You may also notice deformation in the igniter, which prevents it from generating a sufficient arc to ignite the gas. In this case, replacing the igniter and thoroughly cleaning the combustion chamber can restore functionality. This usually costs around $580.

If you schedule regular annual maintenance with us, we charge a basic maintenance fee of $268 per visit (excluding any parts or repair costs) to ensure your boiler operates safely, efficiently, and reliably throughout the winter.

为什么我家的锅炉会出现故障代码F4并且被自动锁死?

一般锅炉的使用寿命是10-15年,如果每年按照厂家,BC省技术监督局以及我们安装承包商的要求每年强制保养的话,一般都是能超过15年的,而没有每年保养的话一般都用不到10年就会整机更换。

F4代表设备故障,有很多可能性,最不乐观的就是设备内部烧穿漏水,喷射出的小水柱无法让设备启动。这种情况需要更换内部交换器,费用一般在5000左右,也有很多客户选择直接更换一台全新的锅炉,大致费用在12500左右。

当然,F4还有其他原因,炉膛过脏,沉积的物质消减了点火器的电弧,导致无法点火。在观察点火器的时候,也会看到其本体产生变形,无法形成足够的电弧引燃加压喷射的天然气。这种情况更换点火器和做一次彻底炉膛清洁即可再次投入使用,这种费用不高,大致在580左右。

如果每年定期找我们保养,我们收取268/次的基本保养费用(未含任何配件费用和维修费用),确保您的锅炉安全,高效,稳定地度过每一个冬天。